Proof

A sample report, before you send anything

A fictitious mill certificate, checked against a fictitious customer’s spec and purchase order. This is what you get back for every certificate in a pilot.

Last updated · Synthetic example; no real certificate or customer

Screen recording

Walk-through of the sample report (under 2 min, narrated). Synthetic voice and synthetic data. Text version below.
What the video shows, as text 1:41

Synthetic example

  1. 0:00 Walk-through. The Stavmark logo and the three results: pass, mismatch, cannot check.

    • Mill certificates, checked line by line.
  2. 0:03 Check 1, Chemistry. Certificate, Mn: 1.71 %. Your spec, max: 1.66 %. Result: mismatch.

    • One mill certificate, checked against your own spec.
  3. 0:14 The documents. Certificate, EN 10204 3.1: Example Steelworks (fictitious); S355J2+N plate, 2 heats. Your spec: S355J2+N, plate up to 16 mm; chemistry, mechanical. Your PO: PO 4500-0912, line 10; 12 plates, 3.1 required.

    • Your limits come from your own spec file, not from a standard.
    • Everything here is fictitious.
  4. 0:24 Check 1, Chemistry. C 0.16 (max 0.20): pass. Si 0.32 (max 0.55): pass. Mn 1.71 (max 1.66): mismatch. P 0.014 (max 0.025): pass. S 0.006 (max 0.020): pass. Mo <0.006 (max 0.005): cannot check.

    • Every value, checked.
    • Mn 1.71 % is above max 1.66 % in your spec.
  5. 0:32 Check 1, Chemistry. Certificate, Mo: <0.006 %. Your spec, max: 0.005 %. Result: cannot check.

    • One it can’t prove.
    • Over or under 0.005? The certificate doesn’t say.
    • Not proved, so not a pass.
    • Marked “cannot check”, for a person to decide.
  6. 0:58 Check 3, PO match. Your PO, line 10: 12 plates. Certificate, 2 heats, 6 + 5: 11 plates. Result: mismatch.

    • The certificate lists 11 plates; PO line 10 orders 12.
  7. 1:07 All six checks. 2 mismatches, 1 cannot check, 7 within your spec and PO.

    • A person on your side confirms each flag.
  8. 1:18 What it is.

    1. An assistive check.
    2. Verify against the original certificate.
    3. Not a determination of origin or conformity.
    4. Receiving inspection stays with you.
  9. 1:29 Start. mathias@stavmark.com, Mathias Klungtveit, Stavmark, Norway.

    • See it on your own certificates.
    • E-mail me for the one-page pilot terms.
    • You pay only after a proof batch on your own certificates. Everything is by e-mail; no calls or meetings needed.

The documents

All three are made up for this page. The limits are the fictitious customer’s own, not copied from any standard.

Certificate · EN 10204 3.1

Example Steelworks (fictitious)

Cert. no.
EX-26-0147
Product
Plate, S355J2+N, 15 × 2000 × 6000 mm
Heats
24A118 (6 plates), 24A119 (5 plates)
Melt and pour
Sweden (both heats)

Your spec file (fictitious)

S355J2+N, plate ≤ 16 mm

Chemistry
C ≤ 0.20 · Mn ≤ 1.66 · Si ≤ 0.55 · P ≤ 0.025 · S ≤ 0.020 · Mo ≤ 0.005 %
Mechanical
ReH ≥ 355 MPa · Rm 470–630 MPa · A ≥ 22 % · KV −20 °C ≥ 27 J

Your purchase order (fictitious)

PO 4500-0912, line 10

Ordered
12 plates, S355J2+N, 15 × 2000 × 6000 mm
Certificate
EN 10204 3.1 required

The report

2 mismatches 1 cannot check 7 groups within your spec and PO

  1. Check 1Chemistry, heat 24A118: C, Si, P, SCertificate0.16 · 0.32 · 0.014 · 0.006 %Your spec / POmax 0.20 · 0.55 · 0.025 · 0.020 % pass
  2. Check 1Chemistry, heat 24A118: MnCertificate1.71 %Your spec / POmax 1.66 % mismatchMn 1.71 % is above max 1.66 % in your spec.
  3. Check 1Chemistry, heat 24A118: MoCertificate<0.006 %Your spec / POmax 0.005 % cannot checkThe printed bound <0.006 doesn’t show which side of max 0.005 % the value is on. It can’t be proved, so it is not a pass.
  4. Check 1Chemistry, heat 24A119: all six elementsCertificateC 0.15 · Mn 1.48 · Mo 0.004 %…Your spec / POyour limits pass
  5. Check 2Certificate typeCertificateEN 10204 3.1Your spec / POPO asks for 3.1 pass
  6. Check 3Grade, standard and sizeCertificateS355J2+N · 15 × 2000 × 6000 mmYour spec / POPO line 10: same pass
  7. Check 3QuantityCertificate11 plates (6 + 5)Your spec / POPO line 10: 12 plates mismatchThe certificate lists 11 plates across two heats; PO 4500-0912 line 10 orders 12.
  8. Check 4Heat numbersCertificate24A118, 24A119Your spec / POpresent, no duplicates pass
  9. Check 5Mechanical, both heats: ReH, Rm, A, KV −20 °CCertificate389–402 MPa · 528–541 MPa · 23–24 % · 61–70 JYour spec / POmin 355 · 470–630 · min 22 · min 27 J (≤ 16 mm) pass
  10. Check 6Melt-and-pour country, both heatsCertificateSwedenYour spec / POshown for every heat present

In a pilot, the same results also come as an Excel spreadsheet, CSV and EN 10168-style JSON. A person on your side confirms or rejects each flag.

Assistive extraction. Verify against the original certificate before use. This is not a determination of origin or conformity. Receiving inspection remains the customer’s responsibility.

Start

Want to see the same on your own certificates?

Ask for the one-page pilot terms:

8-week pilot on up to 800 of your own certificates: €450£390SEK 5 100NOK 4 900, ex. VAT. You pay only after a proof batch on your own certificates, and get the fee back if the pilot misses the criteria we agree in writing. Everything is by e-mail; no calls or meetings needed. We usually reply within one working day (Norwegian time).